Radio World

The Society of Broadcast Engineers has announced that it has reached an agreement to provide spectrum coordination services for the Department of Defense in the 2025–2110 MHz/2 GHz range. That range is a slice of the Broadcast Auxiliary Service Spectrum. It also includes some civilian mobile,  military and other federal activities such as NASA communications.

The DoD is developing and deploying training systems that will be active in that range in a number of locations across the country. Since it is shared spectrum, the department wanted to avoid disruption of the services as well as disrupting civilian and commercial services also using that range.

That particular range is used by radio and TV stations, notably STLs/TLSes, auxiliary broadcasting such as translators, cable TV relays and more. After consultation with the SBE along with the National Association of Broadcasters the department has entered into an agreement with the SBE for the broadcast engineering association to provide nationwide frequency coordination services.

According to a release the SBE board of directors approved the agreement in April. The association has selected the broadcast consulting firm Technical Broadcast Solutions. Its principal is R.J. Russell, CPBE, a 20-year member of the SBE. He was most recently also SBE national vice president and chair of its Frequency Coordination Committee.

SBE President Jim Leifer said, “Part of the SBE’s mission is to create working alliances within the broadcast industry and with those who work in our space. Entering into this agreement serves to protect broadcaster’s use of spectrum and provides a needed service to our government. I am pleased that we are able to partner with the DoD’s prime contractor in this effort.”

[Subscribe to our newsletter and get it delivered right to your inbox.]

The post SBE to Coordinate With DOD on Select RF appeared first on Radio World.

A heavy monetary forfeiture in the amount of $15,000 has been laid at the doorstep of a Virginia AM station after a series of alleged public file violations.

The Federal Communications Commission said that Hubbard’s Advertising Agency Inc., which is licensee of station WLLL(AM) in Lynchburg, Va., violated two sections of FCC Rules by failing to prepare required quarterly issues/programs lists and failing to upload that information into the station’s online public inspection file (OPIF).

In response, the company said the oversite was not intentional. The company’s owner, 92-year-old Fletcher Hubbard, is not computer literate, the letter said, and did not understand how to access WLLL’s online pubic file “let alone how to upload documents to the file.”

[Read: Small AM Station Hit With Violation Notice Over Tower and Station ID]

The FCC recently reviewed its public inspection file rules, which state that commercial broadcast licensees must maintain a public inspection file that details community-oriented programs that the station has covered during a three-month period. That list must include a narrative of the issues that were addressed as well as the time, date, duration and title of each program. Those issues and program lists must then be placed in the station’s public file and be kept while the station’s license renewal application is being considered.

The filing system was modernized in 2016 when the commission voted to update the OPIF Rule so that all public inspection files were uploaded to an online database. As of March 1, 2018, all broadcast radio stations were required to post all public file material (except certain political file info) in that file.

As station WLLL began compiling information for its license renewal application, it answered “no” when asked if documents had been properly placed in the station’s public inspection file at the appropriate times.

“[Hubbard’s] adult children, who recently begun to assist him in the operation of the station, have searched for such issues and programs lists and were unable to find any,” the licensee said in an letter to the FCC. “Going forward the licensee’s children intend to make certain that the station complies with all FCC requirements including uploading issues and programs lists to the station’s public file when due.”

But the FCC expressed no inclination to be lenient. “Where such lapses occur, neither the negligent acts or omissions of station employees or agents, nor the subsequent remedial actions undertaken by the licensee, excuse or nullify a licensee’s rule violation,” the commission said in response.

The commission has established a base forfeiture amount of $10,000 for those stations that fail to maintain a public file and an additional $3,000 for failing to upload required information, although the commission has been known to adjust that forfeiture upward or downward after considering the gravity of the violation and any previous offenses.

The FCC decided that a $15,000 forfeiture was appropriate for the licensee’s failure to prepare and upload quarterly issues and programs lists — in part because the public file violations were “extensive and not remediable” and occurred across two successive license terms.

“Notwithstanding the licensee principal’s advanced age, it is a licensee’s responsibility to comply with commission rules,” the Media Bureau said.

But even though the licensee’s violations were deemed as “serious violations,” they do not rise to the point that the FCC decided to outright deny the station’s license renewal. The commission decided instead to approve a short-term license renewal to ensure the licensee complies with the public file rules moving forward.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post AM Station Hit with $15,000 Forfeiture After Public File Lapse appeared first on Radio World.

As the FCC and other global organizations discuss the potential reallocation of C-band spectrum to assist with the deployment and performance of 5G technologies, the World Broadcasting Unions has released its official position on what any reallocation of the spectrum used for Fixed-Satellite Services would mean for TV and radio broadcasters around the world. In short, WBU believes it would be a significant issue.

“The recent regulatory inquiries by the U.S. Federal Communications Commission on the potential reallocation of some of the existing C-band downlink allocation (5G services) is a concern for the members of the WBU,” the organization’s position paper reads. “Given the ubiquitous use of C-band spectrum around the world and its potential to provide new services, such U.S. regulatory activity will likely be pursued by other administrations. Any subsequent proposals to globally harmonize the use of these frequencies above 3600 MHz for IMT, argued for on the basis of national reallocations, do not reflect the realities of global satellite service usage.”

[Read: NAB’s McFadden Warns Against Negotiating Available C-Band Spectrum]

Among the primary concerns of the WBU in the event of spectrum reallocation is the potential compromise of existing distribution and collection systems both domestically and internationally. It believes this could be particularly impactful in countries with equatorial geography and high rainfall, which often don’t have viable FSS spectrum alternatives to provide the same level of performance. WBU also contends that some direct-to-home services using C-band in these regions could be affected.

The WBU also worries that in the event of reallocation for the downlink C-band spectrum, the “twinned” uplink C-band frequencies may also be tapped at some point for reallocation.

“In all likelihood, harm will be done to existing C-band users and the solutions will compromise service reliability and increase the costs to the broadcast community,” WBU states.

“While improvements in satellite technology have made the use of C-band spectrum by broadcasters more efficient and effective for both content collection and distribution, there has been real C-band traffic growth over the years, which makes this spectrum crucial to broadcasters today as it was 50 years ago.”

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post WBU Warns C-Band Reallocation Could “Compromise” Broadcasters appeared first on Radio World.

The issue of media ownership is back in the headlines after a federal appeals court ruled that the Federal Communications Commission “overstepped” in its recent media ownership rule changes, failing adequately to consider the effect on women and racial minorities.

The decision by the Third Circuit Court of Appeals comes after a review of the FCC’s 2016 quadrennial review order on broadcast ownership rules.

Back in 2017, the commission voted along party lines to eliminate the ban on cross-ownership of newspaper and TV stations in major markets, to ease the process for media companies to buy additional TV stations in a market, to allow local stations to jointly sell advertising time, and to let companies buy additional radio stations in some markets.

But in a ruling Monday, the appeals said it would vacate and remand the bulk of the FCC’s actions, sending it back to the commission for further consideration.

Democratic FCC Commissioner Jessica Rosenworcel said the court was right to reject Republican-led attempts to loosen restrictions. “Media ownership matters because what we see on our screens says so much about who we are as individuals, as communities and as a nation,” she said. “But over my objection, the FCC has been busy dismantling the values embedded in its ownership policies. Today, the Third Circuit Court of Appeals agreed.”

The National Association of Broadcasters called the decision disappointing.

“The media marketplace has undergone massive changes over the past few decades, let alone since 2004,” said NAB Executive Vice President of Communications Dennis Wharton. “It’s shocking that the same panel of judges has supplanted Congress’ and an expert federal agency’s views with its own for more than 15 years.”

Commissioner Michael O’Rielly was of a similar mind and urged Chairman Pai and the Trump administration to take the case to the Supreme Court. “For too long, the U.S. Court of Appeals for the Third Circuit has abused the statute and defied common sense as it pertains to media ownership limitations. It is clear that no argument, formula or well-reasoned reform can satisfy the majority’s wrong-headed demands, guaranteeing the complete preservation of the broken and outdated status quo,” O’Rielly said in a statement. He called it “a classic case of judicial activism and legislating from the bench that further justifies the ongoing fight for reforming the judiciary.”

The ruling is the latest in a long-running series of skirmishes between the court and the commission.

FCC Chairman Ajit Pai today accused the court of blocking attempts to modernize regulations to match the “obvious realities” of the modern media marketplace.

“It’s become quite clear that there is no evidence or reasoning — newspapers going out of business, broadcast radio struggling, broadcast TV facing stiffer competition than ever — that will persuade them to change their minds,” he said in a statement, adding that the commission nevertheless plans to appeal.

Pai also noted dissenting views expressed by Judge Anthony Joseph Scirica.

Scirica said that while he joined his colleagues in their rejection of part of the order that relates to the FCC’s incubator program as well as parts that deal with the Local TV Rule, he does not share the conclusion that the current FCC orders are arbitrary and capricious.

“In my view, the FCC balanced competing policy goals and reasonably predicted the regulatory changes dictated by the broadcast markets’ competitive dynamics will be unlikely to harm ownership diversity,” Scirica said. “I would allow the rules to take effect and direct the FCC to evaluate their effects on women- and minority-broadcast ownership in its 2018 quadrennial review.”

That leaves the commission with a decision on how to proceed. The 2018 Quadrennial Review is underway, and that process relies upon much of the same analysis as the orders vacated by the court, said Commissioner Geoffrey Starks in a statement.

“The court here suggests that ‘new empirical research’ may be required to fully satisfy our rulemaking requirements,” he said. “I wholeheartedly agree. Needless to say, today’s decision will require us to go back to the drawing board.”

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post Court Sends FCC Back to Drawing Board on Media Ownership appeared first on Radio World.

Don’t eviscerate EEO rules for broadcasters.

That’s part of the message to the FCC from a group of organizations that support equal employment opportunity rules.

The FCC invited comments on how to improve EEO enforcement in broadcasting. The Multicultural Media, Telecom and Internet Council submitted a set of five proposals on behalf of itself and 36 other organizations. But they emphatically argued against an idea put forth recently by a group of 82 broadcasters that would raise the current threshold at which EEO requirements kick in from five full-time employees to 50; the supporters told the FCC that this idea “would put an end to most broadcast EEO enforcement.”

“The 82 broadcasters declare that 50 employees is ‘the number regarded by the human resources profession as demarcating smaller from large for the purposes of hiring a human resources manager,’” the EEO supporters wrote.

[Read: 82 Broadcasters Want to Change the Definition of a Small Station]

“What the 82 broadcasters overlook is the fact that the amount of ‘paperwork’ the FCC requires that does not have to be done anyway as part of any business’ routine personnel functions requires far less time than a full-time employee’s 40 hours per week. In fact, it is exactly the same work that routine recruitment entails: maintaining an email list, hitting a key to send out job notices and posting the notices online — while also ensuring that the posts and job notices are widely accessible and that records of the postings are maintained in the (very rare) event of an FCC audit. This additional ‘burden’ requires more like 40 seconds per week than 40 hours per week.”

The EEO supporters argue that compliance is not arduous and that over five decades, “not a single broadcaster credibly claimed that it suffered any material financial hardship because of the need to comply with the EEO rule. Nor did any broadcaster ever claim that the rule was too dense for it to comprehend.”

They argue that few radio stations and only about half of all television stations employ more than 50 people full-time. “In several states, every radio and nearly every television station would be EEO-exempt. Nearly all noncommercial radio and television stations nationwide would be exempt.

The effect of exempting so many broadcasters from EEO compliance would be devastating, they wrote. “Many broadcast careers begin in small stations. Cutting off EEO protection at these points of entry would have a ripple effect on the rest of the industry. Large broadcasters that do not discriminate would have less diverse, and thus less talented pools of trained applicants from which to draw.”

Finally, they wrote, “the idea that a broadcaster of any size greater than ‘mom and pop’ should be exempt from EEO compliance is deeply flawed and troubling. Broadcast ownership is a privilege that necessarily includes EEO compliance; ownership coupled with nondiscrimination is not a ‘burden.’ Discrimination is a burden.”

The EEO supporters took no position on two other suggestions from the 82 broadcasters, one that would require online posting of all full-time job openings by all licensees of any size including those with fewer than the current threshold of five full-time employees, and another that would have EEO reports filed by “entities” cover entire markets, to avoid a practice by some broadcasters of creating several small entities, each with fewer than five employees.

The supporters listed five priorities of their own. They told the FCC that:

• EEO data should be gathered as necessary for research on industry trends and EEO program effectiveness.
• EEO data should be requested from licensees “found to have failed to engage in the broad recruitment (e.g., via internet postings) that is required by current FCC precedent.” They said that failure to do so means that a licensee recruited primarily by word of mouth, which “has been deemed to constitute a racially discriminatory scheme when performed from a homogeneous staff.”
• Renewal applications and EEO audits should include a certification that job postings occurred before hiring decisions were made; they said this certification is common in other industries.
• The FCC/EEOC Memorandum of Understanding should be updated to ensure that the FCC immediately audits employment units that receive EEOC probable cause determinations.
• And “the commission should open an inquiry … into the pattern of consistently very low representation of minorities in radio news.”

Among the organizations in the MMTC filing are the NAACP, National Urban League, American Indians in Film and Television, Japanese American Citizens League, League of United Latin American Citizens, LGBT Technology Partnership and Institute, and 30 other diversity-oriented organizations.

“Inasmuch as the FCC’s record on EEO enforcement has not been refreshed in detail since 2004, the 37 EEO supporters appreciate this long-awaited opportunity for the commission to complete the unfinished work from its 1998 proceeding on EEO enforcement,” they wrote.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post EEO Supporters Oppose Any Big Change in Threshold appeared first on Radio World.

Ken Beckwith is a field engineer with EMF based in Nebraska. Being a hands-on engineer, Ken has done his share of construction over the years. One of his projects was the construction of an octagonal-shaped AM loop EAS antenna using PVC pipe.

Fig. 1: The completed loop antenna.

Before you begin this project, check out the completed antenna, shown in Fig. 1. The visual will help you piece all the angled elbows and tees together.

Note that to improve the strength of the loop, Ken added a piece of conduit down its middle.

Construction starts with one tee, to which you attach two 4-inch pieces to the arms of the tee. The 2-1/4-inch piece attaches to the bottom of the tee. The 90-degree elbow attaches to the other end of the 2-1/4-inch piece, but save that step until later.

Two 45-degree elbows attach to the 4-inch pieces so they lay flat. This is so the “tail” of the tee is at 90 degrees, as shown in Fig. 2. The 9-1/2-inch pieces of PVC attach to the elbows next. Then, another set of elbows and another set of 9-1/2-inch pieces.

Fig. 2: Two elbows attach to the 4-inch pieces so they lay flat. The “tail” of the tee is at 90 degrees.

Continue with a third set of elbows, and the 9-1/2-inch pieces. Attach the 2-1/8-inch pieces to the last elbows. The “tee box” is connected to the 2-1/8-inch pieces, so the bottom of the tee sticks up parallel with the tee at the top of the antenna.

Attach the 23-1/4-inch piece to the 90-degree elbow, mentioned above, and then attach the other end of the elbow to the 2-1/4-inch piece on the top tee. Position it so the bottom end will connect to the remaining tee at the tee box.

Attach the 2-inch piece to the tail of the remaining tee, then connect it to the 23-1/4-inch piece so the 2-inch piece fits down into the bottom of the tee on the tee box, as shown in Fig. 3.

Fig. 3: The 2-inch piece fits down into the bottom of the tee on the “tee box.”

Attach the remaining piece of conduit to the other end of the tee, and attach the end cap to the end of that piece, to complete construction. Assemble the parts without glue, first. Once everything is fitted properly, use PVC cement to make a permanent bond.

After the glue is dry, fish a pull string through the conduit loop. A vacuum cleaner will make the job easier. Tie the Belden cable to the end of the pull string, and secure with electrical tape. Pull the cable through the pipe.

Strip the jacket off both ends of the cable and unwrap the shielding foil from each of the three pairs, and from both ends. Cut the shield wires off only one end of the cable. Join the ground wires at the other end together. Take the red wire next to the shields and lay it with the shields. It will be connected later. Take the other end of the red wire and connect it to the opposite end of the black wire paired with it. You’ll want to solder these connections, and cover them with a short piece of heat shrink or electrical tape. You will be making a six-turn coil using the multi-pair wires.

Now take the other end of that black wire, described above, and connect it to the white wire on the opposite side. The second end of the white wire connects to the black wire of the same pair at the first end. That black wire then connects to the green wire on the opposite side. The second end of the green wire then connects to the opposite end of the black wire it is paired with. The second end of the black wire connects to ground along with all of the shields.

Confusing? Fig. 4 gives you a visual of the connections.

Figs. 4a and 4b: A visual representation of the wiring connections to form a six-turn loop antenna, and a closeup identifying the wire colors.

Once the connections are made, connect the shields and the black wire from the opposite side to ground using a 3/8-inch ring connector. That is held in place using the nut securing the F connector barrel to the tee-box housing.

Fig. 5: All of the wiring connections, as well as the ground for the F-connector, are made in the tee-box.

The antenna has a broad coverage angle with a deep null when the antenna is broadside to the signal. Aim the “edge” of the loop toward the AM station you want to receive. The strongest signal will be received when the antenna end or edge is pointing to the signal source. The antenna can be mounted on a mast with U-bolts, hose clamps or whatever else works.

Here’s the construction parts list:

A 10-foot length of 3/4-inch diameter, schedule 40 PVC conduit cut into the following lengths:

2 – 4-inch
1 – 2-inch
1 – 2-1/4-inch
2 – 2-1/8-inch
6 – 9-1/2-inch
1 – 23-1/4-inch

Whatever is left over can be discarded, but before making your cuts, cut the flared end off, so all cuts are even.

1 –  3/4-inch 90 degree elbow
2 – 3/4-inch tee
8 – 3/4-inch 45 degree elbows
1 – 3/4-inch cap
1 – 3/4-inch tee box, plastic, with weatherproof gasket
1 – 7-foot piece of Belden 8777 or other three-pair shielded cable
3 – 7-foot single-pair shielded cables can substitute for Belden 8777
PVC primer and cement
Wire nuts or other connectors
1 – 3/8-inch ring terminal
F connector barrel with nut

Fig. 6: The completed antenna, showing the F-connector on the tee box.

Share your tips with other engineers in the pages of Workbench while qualifying for SBE recertification credit. Send your tips and high-resolution photos to johnpbisset@gmail.com.

Author John Bisset has spent 50 years in the broadcasting industry and is still learning. He handles western U.S. radio sales for the Telos Alliance. He holds CPBE certification status with the SBE and is a past recipient of the SBE’s Educator of the Year Award.

The post Construct an EAS Receive Loop Antenna appeared first on Radio World.

WOOFFERTON, England — Nestled in the beautiful Shropshire countryside, just a few miles from England’s border with Wales, is the tiny village of Woofferton. That name is synonymous with shortwave radio for millions of listeners around the world as just a short distance from the village itself, lays the United Kingdom’s last remaining public service shortwave transmitting station.

Antenna switches in the field feed the HF curtain arrays.

Now owned and operated by Encompass Digital Media, Woofferton recently celebrated its 75th birthday. Built in 1943, the station has a fascinating history; originally designed to bolster the BBC’s General Overseas Service (now the World Service) during the latter years of World War II, it was later partly funded by the United States and was used extensively by the Voice of America to broadcast into Eastern Europe and the former Soviet Union during the cold war years. Today, Woofferton transmits programs for the BBC and a number of other international broadcasters, reaching audiences across Europe, North Africa and the Middle East.

OPERATIONS

Woofferton near Ludlow in Shropshire is the U.K.’s last shortwave broadcasting station.

There are 10 high-power HF transmitters at Woofferton. They range from Marconi senders of various vintages, including two BD272 250 kW units that date back to the 1960s, to the more recent 300 kW B6124 solid-state transmitters, and four of the most modern RIZ 250K01 wideband systems, which are also capable of operating in Digital Radio Mondiale (DRM) mode. In fact, the BBC’s daily DRM transmission for Europe is broadcast from here.

Outside in the antenna field, there are 35 shortwave curtain arrays (aerials) supported by 25 masts. Most of the antennas can be operated in full or half-curtain mode, depending on the coverage required, and can be electronically steered (slewed) to beam transmissions in a variety of directions. This is done by varying the phase of the signal and feed points to the antenna, rather than by physical movement.

The Duty Room has visibility of all of the station’s transmission systems, and executive control of the broadcast schedule.

The Woofferton team numbers some 14 staff, comprising of broadcast engineers, maintenance technicians, mechanical and electrical engineers, riggers (antenna specialists) as well as providing an outpost for Encompass’ International Operations team. The station’s facilities and location make it an excellent logistical base for the testing, servicing and deployment of a wide range of satellite receivers and FM radio transmission systems which are installed at hundreds of BBC FM relays and partners around the world.

A Marconi BD272 250 kW sender, one the station’s oldest transmitters, is still in regular daily use.

Woofferton has one of most modern and flexible transmission control systems in the world, allowing the entire facility to be remotely controlled and monitored by Encompass’ MCR in London, over 150 miles away. At around 5 p.m. each evening, the Woofferton engineers handover control to the nightshift in London and until 8 a.m. the next morning, the whole operation is fully automated.

MCR engineers in London can take control at any time however and remotely power up and tune the transmitters and then switch the output to any of the available antennas in just a few minutes. This capability is particularly useful if another transmitter fails and an alternative resource is required at very short notice. This flexibility means that scheduled broadcasts from other international sites, such as from Ascension Island, the Middle East and even Singapore, can be “covered” from Woofferton, minimizing the impact on listeners if a breakdown occurs.

MAINTENANCE

A shortwave transmitter station is a complex mix of engineering disciplines — from high-voltage electricity and radio frequency and traditional audio engineering, through to modern computer processors, which run the station’s automation and control systems.

Throughout a typical day, the duty engineers coordinate any changes to the transmission schedule, which may be required to allow maintenance and repairs to be carried out.

Non-radiating towers support the latticework of HF curtain antennas.

Ensuring the safety of staff working inside the transmitter enclosures and outside on the antennas is essential: a safety lock out system is used to isolate the equipment to be worked on, with unique physical “keys” and interlocks needed to make sure systems cannot be used or become live until the engineers and riggers are safely clear of high voltages and radiating elements.

Surprisingly maybe, the middle part of the day is one of the “quietest” periods at the site, as most transmissions take place during the early morning and evening, due to the time differences between the U.K. and audiences in Africa and the Middle East. This is therefore the ideal time to carry out routine maintenance to the transmitters, some of which are still going strong after 40 years of service thanks to the skills and expertise of the Woofferton engineers.

One of the station’s four RIZ 250 kW transmitters that is used daily for the BBC’s DRM transmission to Europe.

They need a carefully planned regime of regular checks and preventative work to keep them on the air, as well as some tender loving care — something which is in no short supply at Woofferton. A myriad of maintenance tasks are carried out, which include checking the RF, modulator and water cooling systems, and testing individual components such as resistors and capacitors, and of course the valves themselves.

Any faulty components will be replaced with spares from stores, or as is sometimes required when items are obsolete, manufactured on-site by the station’s workshop. The mechanical and electrical engineers can fabricate bespoke metalwork and fittings which are no longer available, as well as carry out maintenance to the stations “heavy” equipment such as HV transformers, fan units, gas compressors and pumps.

MISSION-CRITICAL ROLE

At around 3 p.m. GMT each day, the station comes alive as the evening transmissions for Africa and Middle East start to ramp up and by 6 p.m. almost every transmitter is on-air, broadcasting in languages such as Arabic, French, Hausa, Amharic, Kurdish, Dari, Pashto and Russian, as well as English.

DT700 monitoring receivers analyze the parameters of DRM broadcasts from the station’s digital transmitters.

In recent years, Woofferton has also taken on a new role in being one of a few sites around the world where satellite carrier monitoring is carried out, to check and report on the performance of quality of satellite distribution of the BBC’s international TV and radio channels.

More than 75 years after its first broadcast to wartime occupied Europe, Woofferton continues to demonstrate the unique and enduring power of shortwave broadcasting — especially in parts of the world where media freedom and access to objective news is sometimes made deliberately difficult for international broadcasters to reach. And it’s still proud of its critical role in informing, entertaining and educating millions of listeners around the world.

[Want more information like this? Subscribe to our newsletter and get it delivered right to your inbox.]

The post Historic Woofferton Boasts a Modern Twist appeared first on Radio World.

On Sept. 22 in Bengaluru, ahead of the cricket match with South Africa, All India Radio hosted a public roadshow event designed to highlight DRM sets in cars that are receiving digital services from AIR.

The event followed the recent announcement made by Shashi Vempathi, the public radio and television Prasar Bharati’s CEO, who revealed that live cricket commentary would return to AIR and be broadcast on DRM for the first time.

According to the Digital Radio Mondiale consortium, the cricket matches, the most popular sport in India, serve as an ideal space for publicizing DRM’s features, including data reception. In addition to receiving sports updates participants in Bengaluru can also receive agricultural produce market rates.

The post AIR Highlights DRM Ahead of Cricket Matches appeared first on Radio World.

Now in its fourth year, NAB’s Pilot Innovation Challenge, part of the association’s business incubator, Pilot, is now accepting proposals and has announced a new component for this year’s program. For the first time, Pilot will provide support to a pair of winners so they can develop a prototype to be presented at the 2020 NAB Show.

[Read: Pilot Promotes 12 Innovation Challenge Finalists(2018)]

The prompt for this year’s Pilot Innovation Challenge is to build an AI character that can have conversations with individual viewers, listeners or consumers, with character traits that can be defined and trained by the broadcaster.

Individuals, teams, companies, academic institutions and nonprofit organizations are eligible to submit proposals, with up to five finalists selected by a panel of judges by the end of November. Of those five, two winners will be granted as much as $150,000, relevant mentorship and feedback during the development of their prototype. They will also be invited to the 2020 NAB Show, April 18–22, in Las Vegas to demonstrate the prototype.

The deadline to apply for the Innovation Challenge is Oct. 18. Interested applicants can review the judging criteria and apply here.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post NAB’s Pilot Seeking Proposals For AI-Inspired Innovation Challenge appeared first on Radio World.

The author is membership program director of the National Federation of Community Broadcasters. NFCB commentaries are featured regularly at www.radioworld.com.

Community radio attracts so many talented individuals who devote time managing and shepherding stations through many adventures. Virtually all of these people do what they do for the love of their local stations. So, at a time of the year when many community media organizations are nearing the end of the fiscal year, this is a gentle encouragement to think about these selfless individuals and their futures.

To be sure, no one is getting rich off running a community radio station. But that isn’t an excuse for keeping them destitute either.

[Read: Community Broadcaster: Community Radio Needs You]

My timeline the last few months has been dotted with stories of talented community radio general managers, journalists and other leaders leaving for greener pastures. The departures all have a similar ring: opportunities you can’t pass up and offers that are too good, among other reasons. Less in the public eye are issues stations can improve upon.

Not every station has the resources currently to afford staff. But if your community radio station does have staff, attracting gifted people and keeping them happy means more than promising them a fulfilling role. It means valuing their contributions by treating them like professionals who care about your organization.

Not enough of us give thought to drawing in and retaining the best people. Moreover, having limited resources is used not as a challenge to do better, but a rationalization to do nothing. Thus the backchannel stories are troubling: staff who had to take extra jobs to support their families on a station salary; stations that asked for 60-hour work weeks and little appreciation; stations that would not offer health insurance; unions that failed to advocate for even a cost of living increase in a decade or more. The most problematic boards and senior leadership in these scenarios suggest a community radio job as a privilege and other audacious proclamations directly opposed to labor fairness, diversity and equity.

And we wonder why stations struggle. Look not much further than turnover and a lack of investment in people who care.

I speak about these matters from a place of compassion for stations, but also direct experience with station myopia. I worked for a community radio station for years without a penny extra in wages. Like many station staffers, I accepted such because the organization was meaningful to me. However, I suspect a lot of station staffers make similar excuses. In the end, this acceptance does not make for forward-thinking dynamics. It may contribute to dissatisfaction instead. And the people who should act to make these situations better are only emboldened to advocate for quasi-austerity or, worse still, inaction.

As many nonprofits get ready to kick off the new fiscal year, don’t be that station. Don’t treat the people who love your organization and give so much of their time and ideas to its betterment like people whose lives you should not care about. And don’t fall back on the collective shoulder shrug to address the needs of community radio.

Different community radio stations are faced with different local conditions, so it is impossible to be prescriptive about how organizations should remedy these matters. However, a commitment to change is a start. From staff evaluations to studying area pay trends to investigating healthcare options, there is a lot boards and senior leaders can do. Equity and fairness starts at home.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post Community Broadcaster: Acting on Equity appeared first on Radio World.

The new edition has AoIP tips, emergency operations kits for public radio stations, the transmitter remote controls of yore, battle lines in the translator interference debate, our preview of the Radio Show in Dallas and much more.

DALLAS PREVIEW
“Tech Tuesday” and Lessons From the Cowboys

Read about the convention’s fresh new feel, its day devoted to technology, and highlights of the three-day event including business ideas from Dallas Cowboys’ Chief Brand Officer Charlotte Jones Anderson.

NEW FACILITY
Stitcher’s Flexible New Facility in Manhattan

The company moved into new headquarters and built studios for creating podcasts; find out what’s in them.

ALSO IN THIS ISSUE:

• Smart Speakers Grow Even More Important
• Jay Tyler’s Top AoIP Trends
• About the EBU Media Technology Pyramid

 

The post Inside the September 11th Issue of Radio World appeared first on Radio World.

The Wisconsin Broadcasters Clinic, Oct. 15–17, is a highly anticipated annual event for radio broadcasters. Like a miniature NAB Show it offers a wealth of information from a show floor along with useful sessions. Radio World is previewing several of those upcoming sessions.

 Tim Wright is a senior engineer for the Cumulus Radio Station Group in Chicago. He’s taking a look at the using the Raspberry Pi computer system in a broadcast environment in “Nuts and Bolts: Building the Perfect Pi,” Oct. 15, 7 p.m.

Radio World: The Raspberry Pi is still unknown to a lot of radio broadcast engineers. What is it and how can it be of use in a radio broadcast environment?
Tim Wright: The Raspberry Pi is a single board SOC (system on a chip) computer that is about the size of a deck of cards. It runs a ARMCore version of Debian Linux in a standard configuration but can also run Ubuntu Linux, several other more obscure OSes, and Windows 10 IOT (If you like the Microsoft [non]security model). The basic Raspberry Pi model lists at $35 US so it is a very cost effective solution for those broadcast applications that would normally require a full blown PC to just loaf along and do one thing.

RW:  What is a good and useful studio project?

Wright: I have implemented several applications for the Raspberry Pi for our studios and transmitters for Cumulus Chicago. We will be showing, hands-on, several of these applications at the “Nuts and Bolts” session of the Wisconsin Broadcasters fall show. My first application was porting Anthony Eden’s Livewire Simple Delegation Switcher to the Pi. At that point it only ran on Windows in a windowed configuration. I needed a border-less configuration with large buttons to use as a monitor routing panel to select which audio went to overhead speakers in Sales, Promotions, and common areas. Since the code is open source, I modified it to fit my needs. Since that time, Anthony has posted Raspberry Pi configuration instructions on his GIT repository web site.

The Raspberry Pi version of the Livewire switcher that Tim Wright has developed.

My second project was for the transmitter sites. I developed a temperature sensor (thermometer) that outputs SNMP data for ingestion into my icinga2/Grafana-based “Heads Up Display” in the TOC. I have also developed several types of multistream monitors for web streams, and a studio clock that interfaces with Livewire right now, and WheatNet is in the works.

Additional applications that are possible but not necessarily practical, include an IP-based STL/TSL, decoding HD Radio using a Pi and an SDR dongle, DHCP server, multimedia displays, KODI home theater, etc.

Use your imagination, or as they say, “Imagine the Possibilities.”

RW: Can it be used in networking?

Wright: The Raspberry Pi family, with the exception of the $5 Pi Zero, support networking. The currently available versions 3B and 4 support both wired and wireless networking, with the 3 at 100 Mbps and the 4 at gigabit speed.

In addition there are third-party hardware additions that allow POE (Power over Ethernet) of the Pi. Since it is a full-blown Linux system, you can do anything that Linux is capable of.

RW: Its simplicity, small footprint and low power consumption would seem to make it a natural for backup uses. Tell us about that.

Wright: Not just backup uses. I have a web server that has been running on a Pi original model for years quite happily.

I did an analysis of PC vs Pi, since any of the projects discussed in the session can and will run on PC hardware as well. In bottom line terms, what can be done for $900 with a PC can be done for $130 with a Pi and is a tiny fraction of the space. A typical PC consumes 150 W of power and the Pi is 5 W. Do the math — total cost of ownership.

Tim Wright’s Raspberry Pis at work.

RW: Have you worked with the new Raspberry Pi 4 yet?

Wright: I just purchased a half dozen of the Raspberry Pi Version 4 in all the various models (1 GB, 2 GB and 4 GB RAM versions) specifically to use at the WBA for hands-on demonstrations. It took four trips to Micro Center to get them all, because they cannot keep them in stock. Needless to say they are a popular commodity. Be warned, the Version 4 Pi requires a different HDMI cable, power adapter and case, since, following the Apple mantra, why would we want to be backwards hardware-compatible. The larger memory footprint is really only necessary in the minority of applications since Linux runs quite fine with the standard 1 GB. I can imagine that with the dual HDMI ports on the Version 4, the increased CPU speed and cores, and the gigabit networking capability, the Pi could even be used as a digital audio workstation. I have successfully run, as an experiment, a 24-track editor on the Pi 3, so the 4 is even better.

I am setting up all the demo systems with VNC access and Webmin access via HTML, so attendees can use their laptops to play with the systems as if it were a local PC.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post Wisconsin Broadcasters Clinic Preview: Raspberry Pi appeared first on Radio World.

Radio World’s new ebook “AoIP for 2020” is our biggest to date; find it at radioworld.com/ebooks. This article is one in a series exploring that topic. Author Dee McVicker handles marketing and communications at Wheatstone.

There is far more to AoIP than routing and connecting things. It is because of AoIP that we can pan studio cameras at exactly the right moment or load an entire studio of controls onto a tablet, for example.

Where is this all going?

Jay Tyler

Here are the top five AoIP trends, according to Jay Tyler, Wheatstone’s director of sales, who has been involved in hundreds of studio projects.

Native AoIP across distances. There’s a lot of sharing going on these days, from sharing VOs and bumpers between sister stations and sports venues to putting everything into one main operating center for several stations scattered across a region. Being able to move native IP audio and control across distances is why. The cost savings are significant in terms of staff, infrastructure and workflows, and disaster recovery doesn’t get much better than having your essential operation up in a cloud or in another Zip code while dealing with a disaster situation in the studio.

“We don’t care where music lives,” Tyler said. “We can pull it in or we can control it remotely. We can mix it remotely, send it to your transmitter site, bypass the studios, whatever you want us to do, we can now do it using a combination of AoIP logic controls, codecs and connectivity.”

Native IP for phone-ins, too. Connecting VoIP phones directly into the AoIP network without hybrids or stepping through analog-digital conversions means you can do so much more than just route one or two mic feeds down the phone line. You can split feeds, set up multiple sends, customize talkbacks, routing and conference feeds — all possible now that VoIP phones can connect directly into the native IP audio environment.

SNMP everything. “Everyone wants to know what everything is doing, and they’re doing it with SNMP,” he said. SNMP is a set of standards used for monitoring and managing data from servers, printers, hubs and switches. AoIP networks and devices that are SNMP-enabled have MIB files that define relevant data points for monitoring bitrates, temperatures, signal flow and other network details.

For example, WheatNet-IP BLADE I/O units have MIB files with data points for monitoring as well as alerting if a particular port is dropping packets or if a device is heating up and about to fail. In addition to devices containing MIB files, an SNMP browser or management tool is needed for managing networks.

Virtual interfaces into the network. UIs into the IP audio network are taking many forms today, from signal monitoring and switching control panels to news desks complete with talkback button, metering and weather, sports and stock market feeds. Meanwhile, according to Tyler, standalone virtual mixing consoles such as Wheatstone’s Glass LXE are popular in mid-market production rooms because they’re affordable to set up and use, and extremely serviceable for today’s production needs. With native audio IP able to cross distances as mentioned earlier, we can now tap into and control signal streams inside or outside a facility from any user interface available, whether it’s a multi-touch flatscreen or a mobile phone.

AES67 Everywhere. AES67 is no longer an afterthought. This audio transport standard is becoming an important part of the AoIP landscape as we move more and more audio between network systems. Also up and coming are complementary standards based on NMOS and AES70, which promise to add discovery, control and connection management to the interoperability mix.

Comment on this or any story to radioworld@futurenet.com.

The post Jay Tyler’s Top 5 AoIP Trends appeared first on Radio World.

AMSTERDAM — The WorldDAB conference “Radio Distribution Strategies for a Connect World” focused on new and innovative ways to reach and attract audiences in a connected world.

The speakers’ panel at the WorldDAB session during IBC2019. (L to R) Patrick Hannon, Graham Dixon, Michael McEwen, Jørn Jensen, Simon Mason, Andrew Murphy, Jordi Gimenez and Jacqueline Bierhorst.

During the event, Jørn Jensen, senior adviser at NRK, highlighted how the advent of digital radio reversed the trend of radio listening figures in Norway. For years the overall listening values had been slightly decreasing, similar to what was happening in the rest of Europe.

In 2019, after the completion of the FM switchoff, the listening figures began to rise again, he explained. Clearly, the need to replace a legacy radio receiver with a new, digital-capable one did not scare Norwegians, driving them to leave radio behind and massively embrace alternative audio platforms.

NOT MAINSTREAM

“DAB gave Norwegian listeners a much wider choice,” said Jensen. “Apart from moving from three to 15 national radio channels, 35% of all radio listening is now to ‘digital only’ stations, which previously did not exist.”

Norwegian broadcasters were able to design new stations for smaller target groups outside the mainstream market. The NRK station P1+ (targeting listeners over 55), for example, rose to 6th position during its first week on air.

Jørn Jensen said listeners figures rose in Norway after the FM switch-off.

Also, radio commercial revenues can benefit from the digital radio adoption. Even if the United Kingdom experienced a false start with DAB, after 2010 digital radio definitely had a stable comeback there, and now the U.K. is a leading market for DAB.

Overall radio commercial revenue (including FM) followed the rising trend of digital radio popularity. Patrick Hannon, WorldDAB president, emphasized that overall commercial revenues climbed up by 24% from 2014 to 2018.

NATIONAL BRANDS

Patrick Hannon, WorldDAB president, gives a keynote speech and wraps up the session.

“Commercial broadcasters usually see more competition and more costs in the

DAB market,” Hannon said. “But DAB gave them the opportunity to establish national brands, which are transforming the perception of commercial radio in the U.K.” In his opinion, national brands are at the heart of the revenue growth.

The WorldDAB session also focused on the need for broadcast digital radio to secure its place through a fluid distribution mix of the advanced markets are now experiencing all around the world.

The session’s speaker panel also included Graham Dixon, head of radio at the EBU); Michael McEwen, director general for NABA; Simon Mason, head of broadcast radio technology at Arqiva, Andrew Murphy, lead research engineer at BBC R&D; Jordi Gimenez, project leader 5G at Institut für Rundfunktechnik; and Jacqueline Bierhorst, on behalf of Radioplayer Worldwide.

[Read: AoIP, Cloud and Digital Radio in Focus at IBC]

All the speakers agreed that a multiplatform digital radio strategy is necessary to preserve the value proposition of radio in a connected and evolving world.

“We have to maintain trustability and relevance — our content has no value, unless people are using it,” Jørn Jensen concluded.

The post Using Digital Radio to Boost Listening Figures and Revenues appeared first on Radio World.

Matthew Wesolowski

The author is CEO of SSR Communications, owner of WYAB(FM) in central Mississippi.

A proceeding currently before the Federal Communications Commission to provide eligible Zone II Class A commercial FM broadcasters an opportunity to upgrade from 6 kilowatts to 12 kilowatts has not attracted a great number of headlines this year, but that has not prevented the FM Class C4 proposal from making some significant strides as of late.

Most noteworthy, the Class C4 FM idea has attracted some powerful allies. In January, the proposal won the backing of the Sen. Roger Wicker of Mississippi, sitting chairman of the U.S. Senate Committee on Commerce, Science, and Transportation, the Congressional body that maintains direct oversight over the FCC. Sen. Wicker noted that the power increase could be of particular benefit to “small and rural radio stations” in a letter to FCC Chairman Ajit Pai. In his February, 2019 reply, Chairman Pai agreed by saying that the FM Class C4 option “could be especially important for small, minority-owned stations that currently cannot serve their entire communities.”

Sen. Wicker now joins the list of approximately 130 small broadcasters who filed comments in full support during the FM Class C4 Notice of Inquiry (MB 18-184, FCC 18-69) filing windows in September, 2018. Several years prior, FCC Chairman Ajit Pai first advocated for the new station class in September, 2016 at the NAB/RAB Radio Show in Nashville, Tenn., and going back further, the Multicultural Media, Telecom and Internet Council (MMTC) supported the effort in 2013 when it helped author the original proposal.

[Read: Where Things Stand for FM Class C4: the Waiver Route]

Predictably, a turf war has erupted between the small broadcasters that the FM Class C4 proposal would benefit, and larger license holders who generally control the biggest signals in any given market. The National Association of Broadcasters did not support the introduction of a new station class, which is unsurprising, as that same organization vehemently opposed the creation of the FM Class C0 allotment type some 20 years earlier. Although larger companies stopped short of endorsing the idea fully, some nationwide broadcasters did come out in support of the FM Class C4 concept, including Educational Media Foundation, while iHeartMedia did not oppose the new station class in its comments.

The current sticking point in the FM Class C4 proceeding appears to stem from a component of the proposal that would give certain underbuilt Section 73.207-licensed stations a Section 73.215 designation, provided that the affected station has operated under its maximum antenna height, power level, or equivalent thereof, for a period of ten years or more. Under the current FCC rules, a neighboring station looking to upgrade that is adjacent to an underbuilt Section 73.207-licensed station must treat that station as if it were fully built out, whereas a Section 73.215 station can be protected assuming its actual antenna height and power level.

The practice of treating underbuilt stations as if they were fully constructed can have large implications for smaller adjacent stations wanting to upgrade in power or situate their antenna sites more favorably. For example, a full FM Class C1 station is able to broadcast with 100 kilowatts of power from an antenna height above average terrain of 299 meters. If that station were to have an antenna height of only 200 meters above average terrain, then its primary service contour would be about 5 miles short of what a fully built FM Class C1 facility could reach. Any competing neighboring station looking to upgrade is compelled to protect that underbuilt station for five extra miles of coverage that it does not (or if underbuilt for more than 10 years, likely will not ever) serve.

In August, 2019, SSR Communications Inc., which co-authored the FM Class C4 petition with MMTC, presented a revised version of the Section 73.215 aspect of the proposal to the FCC’s Audio Division. The amended plan would still call for redesignation of certain underbuilt Section 73.207 licensed stations as Section 73.215 authorizations, but would also provide a 3 dB protective “buffer zone” to allow the affected stations an opportunity to relocate or build out more fully in the future. The buffer zone would create a protective bubble around underbuilt stations, usually amounting to anywhere from 3 to7 miles, depending on how severely underpowered or under-height the affected station may be.

This 3 dB buffer zone “compromise” would resolve the controversial aspects of the FM Class C4 proposal and should allow the proposal to advance. The buffer eliminates almost all scenarios in which an affected reclassified Section 73.215 facility could be hemmed in and blocked from making future service improvements or tower relocations. It would also disincentivize the Section 73.215 conference procedure for stations seeking such towards neighboring underbuilt Section 73.207 facilities in almost all cases, except for those involving Section 73.207 stations that are the most decidedly underbuilt with respect to their class. Indirectly, the buffer prevents almost any scenario in which a secondary service could be affected by the Section 73.215 component of the FM Class C4 idea.

Meanwhile, an alternative waiver-based path towards a FM Class C4 equivalent facility may also soon exist. In July, 2018, WRTM(FM) 100.5 MHz asked the Federal Communications Commission to consider allowing the station to double in power from 6 kilowatts to 12 kilowatts. If granted, the WRTM waiver application would establish new precedent and provide certain Class A FM stations an opportunity to enjoy an improvement in coverage.

Unlike the FM Class C4 proposal, the WRTM application (BPH-20180716AAC) suggests that, in order to double in power, a Class A FM licensee should guarantee that its upgraded signal would not impact vital LPFM and FM translator services. Also departing from the Class C4 FM proceeding is the idea that a neighboring Section 73.207-licensed station could still be reclassified as a Section 73.215 facility if it is not built out fully, but only if that station has been operating below its antenna height or maximum power level for a period of 30 years (the FM Class C4 proposal states that a 10-year window is appropriate). The WRTM filing backs this argument by saying, “No zoning problem, FAA issue, or cost consideration could not be resolved within 30 years if the desire is truly there to build out fully.”

Whether moving forward “as is,” as an amended proposal with a 3 dB buffer zone consideration, as a waiver-based procedure for eligible stations, or something else altogether, what will happen next in the FM Class C4 proceeding is anyone’s guess. What is clear is, however, is that hundreds of FM Class A stations would be able to double in power and would gladly do so if given such an opportunity. With support in high places, it seems as if a breakthrough is just around the corner, and it could be sooner than later that the FM Class C4 idea moves from concept to reality.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post The FM Class C4 Proposal: The Latest appeared first on Radio World.

A recent visit to the small agricultural town of Hughson, Calif., led Enforcement Bureau staff to note that one Spanish-language station was in alleged violation when it came to lighting and painting its tower/antenna and noting on-air proper station identification.

The agent noted that on more than one occasion, there was no station identification announcement at the hour for KLOC(AM) 1390 kHz, which is licensed by La Favorita Radio Network. FCC rules say that broadcast station identification announcements shall be made hourly and as close to the hour as feasible.

[Read: FCC Pulls License of Alabama Station a Second Time]

The agent also noted several alleged tower and antenna issues, including irregular painting on an antenna installation, inadequate lighting, failure to notify the commission about inoperable lighting and faded painting.

The FCC Rules lay out specific requirements when it comes to painting and lighting towers and antennas — even relying on a paint tolerance chart created by the Federal Aviation Administration and given the heavy name of an In-Service Aviation Orange Tolerance Chart. FCC Rules also say that antenna structures should be cleaned and repainted as often as necessary to maintain good visibility.

So, too, are the FCC rules clear on tower lighting. A tower must be painted for visibility during daytime; during the night, a series of top flashing red obstruction lights and midpoint sidelights must be lit and operational. When those lights are not operating for some reason, the owner of the antenna structure has to report the problem to the FAA unless the lights are corrected within a 30-minute time frame. That notice — called an FAA Notice to Airmen — hadn’t yet been filed by the station, the Enforcement Bureau said.

The FCC has given La Favorita 20 days to submit a written statement explaining the violations and to clarify what action will be taken from here. The commission said it may take further action if warranted, including issuing a Notice of Apparent Liability for Forfeiture.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

The post Small AM Station Hit With Violation Notice Over Tower and Station ID appeared first on Radio World.

When it comes to requesting a reimbursement for repack-related expenses, the clock starts now.

Low-power TV, translator and FM radio stations have a pool of $150 million from which to request funds after the Federal Communications Commission voted in March to allocate additional funding for those adversely impacted by the post-incentive auction TV station repack. The FCC Incentive Auction Task Force and the Media Bureau have since outlined procedures for reimbursing those left out of the first round of funding from the TV Broadcaster Relocation Fund.

The first step, according to a webinar hosted by Hillary DeNigro, deputy chair of the FCC’s Incentive Auction Task Force, is to get a reimbursement form filed in the LMS database (known as FCC Form 2100, Schedule 300). The deadline for that filing is Oct. 15. That form includes an eligibility section as well as a broadcaster relocation reimbursement estimates section.

[Read: Where Did Those Applications Go? Check the LMS]

Next up: file a banking form (Form 1876) in the CORES incentive action financial module database to clarify where funds should be sent.

In the webinar, attorneys and specialists from the FCC walked listeners through the eligibility requirements charts for this process, noting that are unique and separate rules for LPTVs, translators and FM stations when it comes to eligibility.

See the charts for eligibility requirements for both LPTV/TV translator stations and FM stations.

But DeNigro stressed stations should not wait to receive feedback on whether or not they are eligible for stations to start submitting expenses. “You should not wait to receive feedback on eligibility,” she said. “We encourage you to not wait but to [go ahead and] submit the forms because we are reviewing materials as we receive them.”

How much can a station expect to receive? That will be dependent a number of factors, DeNigro said, including the number of stations that file, the aggregate dollar value of verified estimates received by the commission, and the amount available for reimbursement based on that category of stations.

Payments will be made on a rolling basis; so get your invoices in, she said. “You don’t need to until you have everything together before you submit payment.”

Once a station’s move is finalized and all expenses have been accounted for, a final form 399 is needed to let the commission know that you’re closing out your account. The deadline for those forms is July 3, 2023.

[Subscribe to our newsletter and get it delivered right to your inbox.]

 

 

The post FCC: The Time to Request Repack Reimbursements Starts Now appeared first on Radio World.

“The early bird gets the worm, but the second mouse gets the cheese.”

Component old age is not the only cause of equipment failures. Another, more disgusting, one is vermin infestation, which will become common again now that cooler weather is upon much of the nation.

If you haven’t taken steps to place bait traps and moth balls around your remote transmitter site, now is the time. All sorts of animals are attracted to the warmth of your transmitter building; and they will quickly set up home, sometimes in or on your equipment. See Fig. 1.

Fig. 1: DA parameters out? No, the antenna monitor was being used as a mouse outhouse. The top vents on the monitor served to channel liquid inside, destroying printed circuit boards.

Stop the problem before it begins. Rodents like to travel along walls; place your glue or bait traps there to snag them before they get into your equipment racks.

Little black mouse droppings on the floor of the building or enclosure are a signal for action. If you find that your site has been infested, protect yourself while removing nest and droppings. Wear gloves, a gown and above all a mask to avoid breathing hazardous airborne pathogens.

Fig. 2: A useful resource can be found at www.bestwaytogetridofmouseinhouse.com/mouse-infestation/#risks.

John Wells has written a useful tutorial on illnesses spread by rodents and offers useful tips to ensure their removal. The URL is in the caption for Fig. 2. YouTube also has a number of videos; search “removing mouse infestation” for tips.

 

***

 

Broadcast engineer Tom Norman read with interest our discussion about Frank Hertel’s experience with electrolytic capacitors in an FM exciter. It brought back memories that may be useful for other readers.

Tom remembered an instance in which a remote control system failed. His tests couldn’t produce a reason, but its operation remained horribly intermittent. Tom decided to station himself at the transmitter site until he could figure out what was wrong.

He started with the usual, checking power supply voltages using a VOM. No issues. He checked the same power supply rails with the ’scope. Still nothing wrong.

At one point in the circuit, one of the power supply voltages was further regulated using a three-terminal regulator. Scoping the output of that regulator, he hit the regulator with freeze mist. The tiny amount of ripple disappeared. Tom is not sure what possessed him to check the input terminal of the regulator, but when he did he saw significant ripple. Why was there more ripple on the input of this chip than was present at the output of the regulated power supply feeding it? He froze the chip again and it calmed down.

Tom replaced the chip. No difference. That’s when he considered what was attached to the input and output terminals of the chip. You guessed it: There was a small electrolytic on the input. Tom replaced it. The power supply calmed down, but he still had erratic behavior from the remote control unit.

Tom’s next step was to freeze mist all the active components. He was about to freeze a 741 Op Amp but inadvertently touched it with the little straw from the nozzle of the can of mist. The remote control unit went from erratic to totally dead. He poked the Op Amp again, no difference. He froze it. Back to erratic operation. Tom replaced the Op Amp. Operation was still erratic. Checking the schematic, he noted power supply bypass electrolytic capacitors on the power supply pins. Tom replaced those capacitors. Still erratic.

Pulling out what little was left of hair, he removed the Op Amp and stuffed in a fresh one. Problem solved.

This all took place shortly after a huge electrical storm during which Tom had witnessed multiple direct strikes to the tower.

Although not certain, Tom sees two issues here. One is that lightning can affect components deep inside a circuit, where normally you’d expect them to be safe and sound. His guess is that the electrolytics, being old, failed due to the exacerbating influence of the lightning. Then, for reasons he cannot fathom, one or the other of the Op Amp’s power supply bypass capacitors became inductive and caused oscillations whose peak voltages exceeded the limits of the 741 Op Amp, thus frying it. Although this is speculation, it reminds us that electrolytics should be replaced every seven years or so.

Tom also recalls that as a station engineer, when he found Mallory-brand electrolytic capacitors in a piece of equipment, he would shotgun all of them. He said he’d had so much difficulty with Mallory electrolytic capacitors that he specified that new equipment must not contain any electrolytic capacitors of that manufacture.

Tom writes that he still carries this prejudice, even while acknowledging that things may have changed since then. He doesn’t do much bench work now, but from time to time he will design little circuits for use in his home environment, and when he orders capacitors, he selects another manufacturer — which is funny, because Tom has never had a Mallory Sonalert fail.

Contribute to Workbench. You’ll help your fellow engineers and qualify for SBE recertification credit. Send Workbench tips and high-resolution photos to johnpbisset@gmail.com.

John Bisset has spent 50 years in the broadcasting industry and is still learning. He handles western U.S. radio sales for the Telos Alliance. He holds CPBE certification with the Society of Broadcast Engineers and is a past recipient of the SBE’s Educator of the Year Award.

The post How to Get Rid of That Mouse in the House appeared first on Radio World.

At IBC2019, Tieline unveiled the new Gateway IP audio codec, which the company says, is a compact and powerful multichannel IP audio transport solution for radio broadcasters. The Gateway streams up to 16 IP audio channels with support for AES67, AES3 and analog I/O as standard.

Featuring Tieline’s SmartStream PLUS redundant streaming and Fuse-IP data aggregation technologies, Tieline promises the Gateway will “herald a new era in multichannel IP codec streaming.”

Tieline Gateway is suitable for STL, SSL and audio distribution applications, as well as managing multiple incoming remotes at the studio. The compact unit is interoperable with all Tieline IP codecs and compatible over SIP with all EBU N/ACIP Tech 3326 and 3368 compliant codecs and devices.

“The new Gateway codec delivers up to 16 mono channels or eight stereo streams of IP audio in 1RU to increase efficiency and reduce rack space requirements,” said Charlie Gawley, Tieline’s VP Sales APAC/EMEA. “The Tieline Gateway interfaces with legacy analog and AES/EBU sources, as well as newer broadcast plants with AES67 IP audio infrastructure. An optional WheatNet-IP interface will also be also available.”

Configurable through an embedded HTML5 Toolbox Web-GUI interface, the Gateway can also interface with the TieLink Traversal Server for simpler connections and is fully controllable using Tieline’s Cloud Codec Controller.

The post From IBC: Tieline Unveils Gateway Multichannel IP Codec appeared first on Radio World.

Joe D’Angelo, senior vice president of broadcast radio at Xperi, announced during the Xperi HD Radio market update held on the Nautel booth at IBC that HD Radio tests for FM will begin in New Delhi shortly.

Joe D’Angelo announced plans for HD Radio tests in India during a speech on the Nautel booth at IBC.

“We worked with Nautel to get the authorization required to install a test station in Delhi,” D’Angelo said. “We expect to start on-air trialing within a couple of weeks and continue into next year.”

The FM station will broadcast an HD Radio multicast hosting up to four HD signals. According to D’Angelo, in India there is a remarkable interest in second- and third-language programming, mainly due to the large number of languages spoken throughout the country.

The HD Radio test will demonstrate the entire feature set of the digital radio standard, such as dynamic visual content, station logos and emergency alerts services.

“We will run the trial using standard broadcast equipment from Nautel with the same configuration adopted in the United States, as well as with standard commercial receivers, including the first HD Radio-capable cellphone, named BeatBoy,” D’Angelo explained.

[Read: AoIP, Cloud and Digital Radio in Focus at IBC] 

He added that many of the vehicles shipped to India are equipped with the same HD Radio receiver they feature in the U.S. So, even if it’s disabled by default, local dealers can easily activate it. This means thousands of vehicles will potentially be able to receive India’s first HD radio broadcasts once the service begins.

The post HD Radio Trial Set to Begin in India appeared first on Radio World.